Goodtechwill（qingdao）Co. Ltd.

Home > Product Center

Rubber Process & Rheological Properties Tester >

Strength Tester >

Viscoelasticity Tester >

Fatigue Tester >

Friction Tester >

Environmental Testing Machines >

Hardness Tester & Thickness Gauge >

Weight & Density Testing Machines >

Physical & Chemical Analyzer >

Appearance Quality Testing Machines >

Sample Machines >

Environment Quality Testing >

Plastometer Standard Rubber >

Consumable parts>

Name

Breathing Leaking Tester

Model

GT-2626-AC

     Description                                                     


       It is designed to detect breath resistance, inhalation resistance and respiratory resistance.


     Test Principle                                                  


      The sample is worn on a dedicated head mold, simulate the human breath with air pump, vacuum pump and artificial lung through controlling the air, inhale. The flow of breathing gas can be adjusted, the respiratory rate can be set, the head mold can be rotated at different angles. The exhalation resistance, inspiratory resistance, and respiratory resistance of the respiratory protection device are sensed by the pressure sensor.


     Key Technical Data                                         


Flowmeter range: 0～100L/min

Micromanometer range: 0～2000Pa

Air extracting pump: not less than 150L/min

Air intake pump: not less than 250L/min

Artificial lungs: The servo motor drives the piston to reciprocate by ball screw

Artificial lung respiration frequency: 20，25，40 times/min

Artificial lung respiration capacity: 40，50，100L/min

Controller: HMI+PLC

Dimension (approx): 60 cm×66 cm×170 cm  (W x D x H)

Power: 1∮ AC 220V  50/60Hz